Tap Replacement & Repair in Banbury

Signs you need tap replacement & repair help

These are common signs that you need tap replacement & repair. If you spot one, act early, because small faults often grow.

• ✓ A tap is dripping constantly, even when turned off firmly
• ✓ The tap handle is stiff, loose, or turns without controlling the water flow
• ✓ Water leaks from around the base of the tap or from beneath the sink where the tap connects
• ✓ The tap spout is corroded, cracked, or the finish is peeling and unsightly
• ✓ You want to upgrade to a more modern, water-efficient, or stylish tap design

Our process

These steps show a typical visit. However, the exact method depends on what the engineer finds on site.

1. 1.
   Diagnosis

   The engineer inspects the tap to determine whether a repair is viable, checking the valve, cartridge, washer, and body for wear or damage. They advise whether a repair or replacement is the best option.
2. 2.
   Isolation

   The hot and cold water supply to the tap is isolated using service valves beneath the sink or, if no isolation valves are fitted, at the main stopcock. We can fit new isolation valves as part of the job.
3. 3.
   Repair or Replace

   For repairs, the faulty component is replaced — a new washer, ceramic disc cartridge, or O-ring. For replacements, the old tap is removed, the mounting area cleaned, and the new tap installed with fresh flexible connectors.
4. 4.
   Test and Check

   The water supply is restored and the tap is tested across its full range. We check for leaks at every connection point and ensure the tap operates smoothly with correct hot and cold alignment.